Sale!

XTC Power Products Polaris Ranger XP 1000 Ride Command Turn Signal System with Horn Lighting

$69

SKU: XTC Power Products Polaris Ranger XP 1000 Ride Command Turn Signal System with Horn Lighting
Category:

Lighting

XTC Power Products Polaris Ranger XP 1000 Ride Command Turn Signal System with Horn Lighting Lighting

Polaris Ranger XP 1000 Ride Command Turn Signal System with Horn

XTC Power Products is leading the way in UTV wiring. Installing turn signals on a UTV is easier than ever with our Plug and Play turn signal system for the 2019+ Polaris Ranger with Ride Command. The TSS (Turn Signal System) consists of a relay control box and horn that mounts under the hood and turn signal, used ATV parts, and custom hazard/horn switches that mount in the dashboard. A supplied vehicle-specific tail harness integrates with OEM Polaris Rangers tail lights to convert them to turn signals. *2019+ Polaris Rangers WITHOUT factory installed drive control have 4 pin rear harnesses that power the tail lights, they use part # TSS-POL-GBU. Polaris Rangers WITH factory-installed Ride Command have 8-pin rear harnesses that power the factory taillights AND backup camera, which use thispt# TSS-POL-RCBU.

How TSS Works

All TSS part numbers include a marine grade rocker switch with laser cut directional arrows that turn red when activated. When you press the turn signal toggle switch, the TSS will activate the turn signal, returning the switch to the center position cancels the turn signal. Each TSS has a vehicle-specific harness that plugs in-line with the factory taillight harness. The brake light signal goes through the TSS. As a result, the opposite brake light still operates normally while the activated turn signal brake light flashes.

Also Included

Also included in our Polaris Ranger Plug and Play with Ride Command Turn Signal. The kit is a "Danger/Warning" toggle switch. Pressing the top "Danger" side of the actuator will turn on the hazard lights, moving the switch back to the positionwe will deactivate them. Additionally, pressing the bottom of the custom toggle switch will activate the included street legal FIAMM horn. A front harness is provided that includes two Maxxima 3/4″ Amber LED lights that mount in each corner by drilling a whole. Additional LightThe ts and splitter are sold separately for those looking to expand their setup.

Convenient with the Polaris Ranger Ride Command TSS Plug and Play Turn Signal Kit

Unlike our competitors , joyner utv parts, all TSS kits include an auxiliary power output for a license plate light or whip lights. Additionally, the auxiliary power supply is ideal for powering our 6 inch LED illuminated license plate frame.  Mostly, utv accessories nz, rocky mountain utv parts catalog, hisun 800 utv parts, mx utv parts, bulldog utv parts, each system comes with an al connectionVehicle-specific information. Without a doubt, it is easy to install, with no wires to cut or crimp. Everything needed to integrate with your vehicle's OEM brake light harness included. Disconnect the tail light harness, plug in ours and enjoy. XTC Power Products, Made in America and Wired For Fun®!

Features:
  • Easy Plug and Play Installation
  • Fits 2018-later Polaris Ranger XP 1000 with Ride Command factory installed
  • Fits Northstar Edition and models with factory installed winches
  • 2 and 4 seat models
  • Connects to the OEM bus bar for power
  • Plugs into OEM brake light harness, using factory tail lights
  • Laser etched LED turn signal switch
  • Horn-on emergency hazard switch
  • Rear power output for optional license plate light
  • Horn automobile
  • Made in USA!
VEHICLE FIT

Polaris Ranger XP 1000

, used utv parts, utv junkies TSS-POL-RCBU discountable, Make_Polaris, Model_Ranger XP !0004.92 (330 reviews)