Lighting
XTC Power Products Polaris Ranger (2013-2018) Plug & Play turn signal system with horn Lighting Lighting
Polaris Ranger (2013-2018) Plug & Play Turn Signal System with Horn
XTC Power Products is leading the way in UTV wiring. Installing turn signals on a UTV is easier than ever with our Plug and Play turn signal system for the 2013-18 Polaris Ranger. The TSS (Turn Signal System) consists of a relay and horn control box that mounts under the hood and turn signal, as well as custom hazard/horn switches that mount in the dash. A supplied vehicle-specific tail harness integrates with OEM Polaris Rangers tail lights to convert them to turn signals.
How TSS Works
All TSS part numbers include a toggle switch. marine grade rocker with laser. -cut directional arrows that flash red when activated. When you press the turn signal toggle switch, 8 ply utv tires, used utv parts, utv parts suppliers, TSS will activate the turn signal, theReturning the switch to the central position cancels the flashing. Each TSS has a vehicle-specific harness that plugs in-line with the factory taillight harness. The brake light signal goes through the TSS. As a result, the opposite brake light still operates normally while the activated turn signal brake light flashes.
Also Included
Our Polaris Ranger Plug and Play Turn Signal Kit also includes a "Danger /Horn toggle switch. Pressing the top "Danger" side of the actuator will turn the hazard lights on, returning the switch to the center position will deactivate them. Additionally, pressing the bottom of the custom toggle switch will activate the included street legal FIAMM horn. A front harness is provided that includes two Maxxima 3/4″ Amber LED lights that mount in each corner by drilling a whole. Additional lights and splitter are sold separately forthose looking to expand their setup.
Convenience with the TSS Polaris Ranger Plug and Play Turn Signal Kit
Unlike our competitors, all TSS kits include an auxiliary power output for license plate lighting or whip lights. Additionally, the auxiliary power is good for powering our LED Lit Li 6″ Incense Plate Frame. Importantly, each system comes with a vehicle-specific electrical connection. Without a doubt, it is easy to install, with no wires to cut or crimp. Everything needed to integrate with your vehicle's OEM brake light harness included. Disconnect the tail light harness, plug in ours, DLC UTV Parts and Accessories and enjoy. XTC Power Products, Realtree 24 Volt UTV Replacement Parts, Weller UTV Parts, Bad Boy UTV Parts, Made in America and Wired For Fun®!
Features:- Easy Plug and Play Installation li>
- Suitable for Ranger XP 570/900/1000 2013-2018
- 2 and 4-seat models (2018 Crew model only)
- Fits Ranger XP 570/900 2019-2021 (DOES NOT FIT to 2022 RANGER 570)
- Does not work on Ranger EV models
- Connects to OEM brake light harness, xy 300 utv parts, using brake lights from factory
- Comes with 3/4″ – 3 LED Front Turn Signal Light
- Laser Etched LED Turn Signal Switch
- Emergency Hazard Switch
- li>
- Rear power output for optional license plate light
- Automotive horn and push button
- Made in the USA!
- li>
- Polaris Ranger 570 (2013-2018)
- Polaris Ranger XP 900
Instructions
C15142111 discountable, Make_Polaris, Model_Ranger 570, Model_Ranger 9004.95 (333 reviews)
