Switches
XTC Power Products Polaris RZR 4-Switch Power Control System Switches Switches
Polaris RZR 4 Switch Power Control System
XTC Power Products is leading the way in UTV wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Polaris RZR. Unlike other switch systems available, the 4-Switch Control System is designed with the installer in mind. Each PCS has a vehicle-specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
Power Delivered
The PCS includes 1 x 30 amp and 3 x 20 high current circuits on relays with diode protection. The design reduces voltage spikes due to field collapse, protecting LED lights and other sensitive accessories. A fuse block that protects the circuits is also included and comes with an eight-gauge power cable and fuses. Most systemsUTV charging stations produce between 40 and 70 amps. For this reason, a 50 amp circuit breaker at the battery safely powers the PCS. Installing a high power switch system over 100 amps is not practical.Ctic in a UTV.
The Barrier Strip for 4 Switch Power Control Systems
Professional wiring installers have used barrier strips in off-road vehicle constructions for years. Some good reasons would be aesthetics, Huffy Torex 24V UTV Parts, Vendetta UTV Parts, OEM UTV Parts, as well as ease of use when adding new connections and troubleshooting later. Each screw point on the barrier strip has a different colored wire that matches the wires in the fuse box harness and switches. Therefore, the first toggle switch would be the large gray 30 amp wire, store pUTV parts, and so on.
Switch Power Harness Configurations
Designed for the Polaris RZR XP, the PCS-44 has become our most popular power control system more universal for switch mounting locations. The switch harness has two toggle switches that mount on the center dash, followed by a single switch that mounts to the right of the steering wheel or on the dash, then another that can go to the left of the steering .wheel. Additionally, Empire Industries UTV parts and toggle switches can also be installed together in any custom manner deemed appropriate by the installer. Additionally, a Molex connector connects the switching harness to the main power control system.
Modular power connection
The PCS-44 has a power connector modular power supply at fuse box with +/- ring terminals that connect toignition power. Therefore, the bottom LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The top light only turns on when the toggle switch is pressed. It should be noted that the wiring system will operate with or without the vehicle ignition.
The PCS-44 comes with 4 Carling V Series incandescent toggle switches which have an actuator with a red lens . Alternatively, the PCS-44-NS does not come with any switches. Custom LED illuminated rocker switches are available separately and can be found on our rocker switches page.
Features:- Easy Plug and Play installation
- Fits Polaris RZR XP 1000/Turbo
- Fits Polaris Ranger 13-18
- 4-Switch Power Supply Control System
- 1 x 30A and 3 x 20A circuits switching relayed haute power
- Fuse block with each switch on an individual fuse
- Blowed fuse LED indicator
- 8GA power cable with 50A main circuit breaker at battery level
- Screw terminal block for easy integration
- Bottom row lighting when enhanced switches are used
- Made in the USA!
- Polaris RZR 900
- Polaris RZR XP 1000
- Polaris RZR XP Turbo
