Switches
XTC Power Products Polaris RZR 6-Switch Power Control System Switches Switches
Polaris RZR 6 Switch Power Control System
Mahindra 750 UTV Parts,XTC Power Products is leading the way in UTV wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Polaris RZR. Unlike other switching systems available, the power control system is designed with the installer in mind. Each PCS has a vehicle-specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
Power Delivered
The PCS includes 1 x 30 amp and 3 x 20 high current circuits on relays with diode protection. The design reduces voltage spikes due to field collapse, UTV Parts claims, protecting LED lights and other sensitive accessories. There are also 2 x 10 amp direct wire circuits provided for low consumption accessories like lrock amps or whip lamps. A fuse block that protects the circuits is also included and comes with an eight-gauge power cable and fuses. Most UTV charging systems are produced anywhere from 40 to 70 amps. For this reason, a 50 amp circuit breaker at the battery safely powers the PCS. Installing a high power switching system over 100 amps is not practical in a UTV.
The barrier strip of power control systems
The Professional wiring installers use barrier strips in off-road vehicle constructions. for years. Some good reasons would be aesthetics, as well as ease of use when adding new connections and troubleshooting later. Each screw point on the barrier strip has a different colored wire that matches the fuse box and switch harness wires.eurs. Therefore, the first rocker switch would be the large gray 30 amp wire, UTV winch accessories, and so on.
Switch Power Harness Configurations
Designed for the Polaris RZR XP, the PCS-64 has become our most universal power control system for switch mounting locations. The switch harness has three toggle switches that mount on the center dash, Dell.s utv parts offers, followed by a single switch mounted to the right of the steering wheel, then two more to the left of the steering wheel. Additionally, toggle switches can also be installed together in any custom manner deemed appropriate by the installer. Additionally, a Molex connector connects the switching harness to the main power control system.
Modular power connection
The PCS-64 has a power connector modular power supply at the fuse boxes with +/- ring terminals that connect to the ignition power supply. Therefore, the bottom LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The top light only turns on when the toggle switch is pressed. It should be noted that the wiring system will operate with or without the vehicle's ignition.
The PCS-64 comes with 6 incandescent illuminated Carling V Series toggle switches that feature an actuator with a lens red. Alternatively, the PCS-64-NS does not come with any switches. Custom LED illuminated rocker switches are available separately and can be found on our rocker switch page.
Features:- Easy Plug and Play installation
- Fits Polaris RZR XP 1000/Turbo
- Fits Polaris Ranger 13-18
- 6 Switch Power Control System
- 1 x 30 AMP, Replacement Partsutv trailer Canada, 3 x 20 AMP relayed high power
- and 2 x 10 Amp direct-switch circuits
- Fuse block with blown fuse LED indicator
- Each switch on an individual fuse
- 8GA power cable 50A main circuit breaker at battery level
- Screw terminal block for easy integration
- Lower row lighting when using upgraded switches
- Made in the USA!
- Polaris RZR 900
- Polaris RZR XP 1000
- Polaris RZR XP Turbo
Instructions
, utv parts Cleveland Ohio 885-06-118-2 discountable, Make_Polaris, Model_RZR 900, Model_RZR XP 1000, Model_RZR XP Turbo Style:No Switches,Add Switches4.69 (297 reviews)
