Switches
XTC Power Products Polaris RZR 6-Switch Power Control System with Strobe Lights Switch Switches Switches
Polaris RZR 6 Switch Power Control System with Strobe Lights Switch
XTC Power Products is leading the way in UTV wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Polaris RZR XP 1000/Turbos with Strobe System. Unlike other switch systems available, Mahindra 750 UTV parts, SSR UTV parts, the power control system is designed with the installer in mind. Each PCS has a vehicle-specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
Power Delivered
The PCS-72S includes 1 x 30 amp and 1 x 20 Amp high current circuits on relay with diode protection. The design reduces voltage spikes due to field collapse, protecting LED lights and other sensitive accessories. There are also direct wire circuits of 3 x10 amps provided for low consumption accessories like rock lamps or whip lamps. One Switch is a dedicated strobe light system with 2 channels on a 10 amp fuse. A fuse block that protects the circuit is also included and comes with an eight-gauge power cable and fuses. Most UTV charging systems produce between 40 and 70 amps. For this reason, UTV Parts claims, a 50 amp circuit breaker at the battery safely powers the PCS. Installing a high power switching system over 100 amps is not practical in a UTV.
The barrier strip of power control systems
The Professional wiring installers use barrier strips in off-road vehicle constructions. for years. Some good reasons would be aesthetics, as well as ease of use when adding newconnections and subsequent troubleshooting. Each screw point on the barrier strip has a different colored wire that matches the wires in the fuse box harness and switches. Therefore, the first toggle switch would be the large gray 30 amp wire, 6 passenger UTV, and so on. Finally, the purple and yellow wires are the strobe system circuits and strobe in a left/right sequence when activated. This feature may be integrated into the vehicle's brake light system and other aftermarket accessories.
Polaris RZR Strobe System Switch Power Harness Configurations
Designed to the Polaris RZR XP, the PCS-72S has become our most universal product. Power control system with strobe system for switch mounting locations. The switch harness has three toggle switches that mount into the panelau central edge, followed by a single switch mounted to the right of the steering wheel, then two others to the left of the steering wheel. Additionally, toggle switches can also be installed together in any custom manner deemed appropriate by the installer. The strobe system has 7 different flashing modes that can be activated using the included black mountable switch. Additionally, a Molex connector connects the switching harness to the main power control system.
Modular power connection
The PCS-72S has a power connector Modular power supply at fuse box with +/- ring terminals that connect to ignition power. ConsequenceIn fact, the bottom LED (available on custom rocker switches) will only light up when the ignition key is turned on. The top light only turns on when the toggle switch is pressed. It should be noted that the syThe wiring system will operate with or without the vehicle's ignition.
The PCS-72S comes with 5 Carling V Series incandescent toggle switches featuring an actuator with a red lens, and 1 toggle switch LED lit rocker with strobe lights. Alternatively, the PCS-72-NS ONLY comes with a toggle switch for strobe lights, and no other switches. Custom LED illuminated rocker switches are available separately and can be found on our rocker switches page.
Features:- Easy Plug and Play installation
- Fits RZR XP and Most UTVs
- 6 Switch System, UTV Trailer Parts Canada, One Switch Included with Red LED Strobe Toggle
- Integrated 2 Channel Strobe - 10 Amp Each with strobe toggle switch
- Two 20 AMP high power relayed and three direct 10 AMP circuits
- Fuse block with each light individual fuse
- 8GA power cable 50A main circuit breaker at battery level
- Screw terminal block for easy integration
- Low row lighting when upgraded switches are used
- li>
- Made in the USA!
- Polaris RZR 900
- Polaris RZR XP 1000
- Polaris RZR XP Turbo
Instructions
, utv parts cleveland ohio 885-06-120-2 discountable, Make_Polaris, Model_RZR 900, Model_RZR XP 1000, Model_RZR XP Turbo Style:No Switches,Add Switches4.95 (323 reviews)
